For the highest-quality epoxy flooring installers near you in Boca Raton — industry-leading quality, expert in-house crews, and a lifetime warranty on every floor we coat.
From beachside garages near the Intracoastal to inland Boca Raton homes and Delray Beach communities, Apex installs every coating system South Florida needs.
Diamond-grind prep and a 100% solids epoxy or polyaspartic base — never a paint or a thin sealer.
A UV-stable topcoat engineered for South Florida humidity, salt air & year-round UV.
Why Homeowners Across the Southeast Call Apex First for Epoxy Floor Coatings
01
Free Quote
Line-by-line pricing you can check yourself — no pressure, no countdown timers, no add-ons invented later.
02
Diamond-Grind Prep
Every Boca Raton slab gets a mechanically ground profile — the step DIY kits and cheap crews skip.
03
1-Day Install
Walk on it in 4 hours. Drive on it in 24. Your garage is yours again tomorrow.
04
25-Year Warranty
Written, transferable, and backed by the local Apex location that installed it.
500+Garage Floors
“I’m so happy with my coating! These folks are wonderful at what they do.”
— RODNEY ARNOLD, Google Review
“Elite level flooring from Apex. They use a commercial grade product that lasts a lifetime.”
— CARTER HALL, Google Review
“Apex Epoxy Flooring did a great job on my basement. The crew was easy to deal with and knew what they were doing. Can’t wait to have them do my garage next.”
Explore our most popular flake, metallic, solid-color and marble finishes. We bring physical samples to every free in-home estimate so you can see them on your slab.
Every layer engineered for South Florida heat, Boca Raton humidity, and the demands of a real garage floor.
01
Prepared Concrete Slabdiamond-ground to CSP-2/3
Your existing slab, mechanically profiled to a Concrete Surface Profile of 2 to 3. Cracks patched. Moisture tested, because Florida exempts garage slabs from the under-slab vapor retarder. Nothing above this lasts without it.
A pigmented, self-leveling 100%-solids epoxy rolled wet-on-wet onto the diamond-ground slab, once it reads 5 degrees above the dew point. Delivers the color depth and film thickness paint cannot — and handles moisture vapor better than polyaspartic does.
03
Vinyl Flake Broadcasthand-cast to full rejection
Vinyl chip flakes hand-broadcast into the wet basecoat until the surface refuses more. Cured overnight, scraped flat, vacuumed. Color, camouflage, and slip-grip in one.
04
Polyaspartic TopcoatUV-stable, chemical-resistant
What you walk on. This aliphatic polyaspartic floor coating seals the flake and holds its color under Boca sun — December here still runs over half of April’s peak. Brake fluid and hot tires wipe off; the 25-year warranty starts at this layer.
From Free Estimate to Final Walk-Through
1
Free Estimate
A free, no-pressure in-home quote with real color samples.
2
Diamond Grind
We mechanically diamond-grind your slab to the right profile.
3
Application
100% solids epoxy, flake broadcast, and polyaspartic topcoat.
4
Final Walk-Thru
We walk the finished floor with you before we leave.
Ready to book your free estimate?
Free in-home consultation with real color samples — most Boca Raton jobs quoted same day.
Your price comes down to the finish you choose and the condition of your slab. These are honest, installed starting prices for a typical Boca Raton 2-car and 3-car garage.
Finish
Starting Price
2-Car (~450 sq ft)
3-Car (~650 sq ft)
Best For
Solid Epoxy
$4per sq ft
~$1,800
~$2,600
Clean, budget-friendly single color
Flake EpoxyMost Popular
$6per sq ft
$2,700$2,300
$3,900$2,700
Most garages — hides flaws, adds grip
Quartz Epoxy
$6per sq ft
~$2,700
~$3,900
Maximum slip resistance & durability
Metallic Epoxy
$9per sq ft
~$4,050
~$5,850
High-end, marbled showpiece look
Final pricing confirmed with your free in-home estimate — no pressure, no games.
Serving the Greater Boca Raton, FL Area
Searching for Epoxy Flooring Near Me?
Professional epoxy & garage floor coatings across Boca Raton and the surrounding South Florida communities.
Upgrade Your Boca Raton Garage Floor in 1 Day - Free Estimate
Book Your Trusted Boca Raton Epoxy Flooring Contractor - Free Quote
Free Consultation
Contact us today for a no-cost consultation where we evaluate your flooring needs, provide an estimated price based on square footage, and recommend the best epoxy flooring solutions tailored specifically for you.
Diamond Grinding Floor Prep
We use a diamond propane grinder to meticulously prepare your floor, ensuring a smooth, flawless surface that maximizes the adhesion and longevity of your epoxy floor coating.
Multi-Layered Epoxy Floor Installation
Our team applies multiple layers of premium epoxy resin flooring, each layer enhancing the durability, aesthetics, and overall performance of your new epoxy floor.
Curing & Final Inspection
We ensure the epoxy floor coating cures properly to achieve maximum strength and conduct a thorough final inspection to guarantee your complete satisfaction with the finished project.
You don’t have to choose. We lay a 100% solids epoxy base for depth, then seal it with a polyaspartic topcoat for speed and UV resistance — the best of both.
Boca Raton Epoxy FAQs
Answers From Our Epoxy Flooring Professionals
The questions Boca Raton homeowners actually search before coating a garage floor — answered honestly, including the downsides.
In Boca Raton the number is set by the system you pick, not by the ZIP code. Solid color is $4 per square foot, flake and quartz $6, metallic $9. A typical 2-car garage floor here runs about 450 square feet and lands at $2,300 all-in; a 3-car closer to 650 square feet is $2,700. Slab condition is the one real variable, which is why you get a firm number at your free in-home estimate — not a range.
A 20×20 garage is 400 square feet — ordinary 2-car territory, so the $2,300 flake epoxy figure applies when the slab is sound. What moves it is what we find on the floor: deep cracking, pitting, or an old coating that has to be ground off before anything new goes down. A slab that tests wet enough to need a mitigation step counts too. Either way you hear it before we start, not after.
A professionally installed flake epoxy floor on a Boca Raton 2-car garage is $2,300 with us. A big-box DIY kit costs a fraction of that and performs like a fraction of that. When a bid comes in far under a real install price, something was left out — the diamond grinding, the moisture testing, or the second coat, leaving thin single-coat material sitting on an unprepared slab.
Prep, nearly every time. The rock-bottom bid is a roller, a bucket and an afternoon — no grinding, no moisture testing, no crack repair. A real quote covers mechanically diamond-grinding the slab to a CSP 2–3 profile, patching cracks and pits, and verifying moisture before any product is opened. That last step carries more weight in Boca Raton than most people expect: Florida’s residential code exempts garages from the under-slab vapor retarder, so your concrete may have been poured straight onto sand with no plastic beneath it. Epoxy is a film, and vapor with nowhere to go pushes a film off.
All of it: diamond-grind preparation, crack and pit repair, moisture testing before a drop of product goes down, a 100%-solids pigmented epoxy basecoat, a full vinyl flake broadcast, an aliphatic polyaspartic topcoat chosen to hold its color under sun that barely lets up between December and April here, and a written, transferable 25-year warranty. No trip fees, no add-ons invented halfway through.
Against tile, generally yes — tile costs more to install, and in a Boca Raton garage the grout lines still crack and hold every stain that reaches them. Against polished concrete the two land close together, but polishing leaves you a bare gray slab. A flake epoxy floor gives you color, texture and a non-porous surface that shrugs off oil, brake fluid and pool chemistry, all of which soak into polished concrete.
If it’s installed properly, yes. You go from a dusty, staining slab to a sealed, non-porous surface you can sweep or hose clean, that resists oil, brake fluid, and hot tires, and that makes the whole garage read as finished space. The value hinges entirely on preparation — a coating sprayed over an unground slab is money thrown away.
Three real ones. Cheap epoxy peels. Straight epoxy ambers and chalks under UV — and at Boca Raton’s latitude there is no off-season for that, since December sun still delivers well over half of what April does, so an open garage door in winter is no reprieve. And any smooth, glossy film gets slick when wet. Our answers, in order: diamond grinding for the bond, a true aliphatic polyaspartic topcoat that holds color instead of yellowing, and a full flake broadcast for grip. Solvable — but only if somebody actually solves them.
When a slab is driving moisture vapor up from below, or carries structural cracking or heaving nobody has addressed, an epoxy coating only seals the problem in. That first one deserves attention in Boca Raton: Florida’s residential code exempts garages from the under-slab vapor-retarder requirement, so the garage is often the one slab in the house poured with no 6-mil polyethylene beneath it. Risk also shifts by address — coastal-ridge sand and shell drains sharply, while the flatwoods soils west of the ridge stay wet. So we test before we quote, and we say no when the answer is no.
A smooth, glossy coating can be. Our flake and quartz systems broadcast decorative chips into the wet basecoat, which leaves a subtle texture that grips underfoot — a meaningful difference when you pull a wet car into the garage during a Boca Raton downpour. For wash-down areas we can add extra slip aggregate.
It will not appraise like a kitchen remodel. What it does is show. A finished epoxy garage floor is among the cheapest upgrades that reads instantly as care, it photographs well in a listing, and buyers form an opinion of the whole house in the two seconds they stand in that bay. Our 25-year warranty transfers with the property, which turns a nice feature into something the next owner can actually put a value on.
A professionally installed system lasts 10–20 years, and considerably longer when the prep was done right. What ages a Boca Raton garage floor coating isn’t frost — it’s relentless UV and vapour moving up through the slab. DIY epoxy kits start peeling or yellowing within 2–5 years: thin, water-based, rolled over an unground slab. Ours carries a written 25-year warranty.
Five years on, a properly built flake epoxy floor reads about the same as day one — a touch less gloss where the tires park. A poorly prepped floor at five years tells on itself: lifted patches under the tire tracks, chipping along the door line, and yellowing on whatever strip the afternoon sun reaches. With no off-season to the sun, that fade arrives sooner than owners expect.
Not if the prep is right. The summary of epoxy failures is blunt: up to 80% trace back to poor surface preparation. Peeling and hot-tire pickup come from a weak bond; bubbles and blisters come from vapour trapped under the film. Florida’s residential code exempts garages from the under-slab vapour retarder, so your garage may be the one slab in the house poured with no plastic beneath it — which is why we diamond-grind to a CSP 2–3 profile and moisture-test every slab before a drop of epoxy goes down.
Bare epoxy ambers under UV — chemistry, not workmanship. That’s precisely why we never leave epoxy as the wear layer. At Boca’s latitude the sun never really lets up: solar energy peaks in April and the December floor is still more than half of it. The aliphatic polyaspartic topcoat is what holds colour and clarity with the door open all day.
Yes. Hot-tire pickup happens when hot rubber grabs a soft or weakly bonded coating and peels it up. Our build answers that twice: a 100%-solids epoxy basecoat keyed into a diamond-ground slab, under an aliphatic polyaspartic topcoat that stays hard through South Florida heat. Tires roll off clean.
Better together — that pairing is the entire reason we install both. Epoxy builds thickness and color depth, bonds mechanically into the concrete, and tolerates moisture vapor better than polyaspartic does; polyaspartic on its own is actually the more moisture-sensitive of the two. Polyaspartic, for its part, cures fast and holds color under UV. So the right South Florida build is a 100%-solids epoxy base, a flake broadcast, then an aliphatic polyaspartic topcoat — each layer covering the other’s weak spot.
For the wear layer, yes — aliphatic polyaspartic beats epoxy on UV stability, cure speed, and hot-tire resistance, and here the sun takes no off-season: solar energy peaks in April and December still runs over half of that. For the basecoat, 100%-solids epoxy wins on film build, bond, and vapor tolerance. A single-product floor suits the installer, not your slab.
Layers, not brands. A slab ground to CSP 2–3, a 100%-solids epoxy base, a full flake or quartz broadcast, and a polyaspartic wear layer. Film thickness and bond quality decide how the garage floor coating ages. In Boca Raton, add one line to that spec: Florida’s residential code exempts garages from the under-slab vapor retarder, so the slab gets tested first.
You can, and on a light-use slab it might hold a few years. The honest tradeoff: big-box kits are thin, usually water-based, and substitute an acid etch for mechanical grinding, which is why 2–5 years is a typical lifespan. A kit also can’t hand you dew-point control — the slab has to stay above the dew point through prep, application, and cure, and the muggy season here runs roughly eight months. Grinder rental, material, and a lost weekend land near a professional quote.
Only once the old coating is properly dealt with. If it’s already lifting, new epoxy just inherits the failure — and on a Boca Raton garage the culprit is often vapor from below. That varies by address: the coastal ridge drains sharply, while the flatwoods soils west of it stay wet for months at a time. So we test, then grind the old system back to sound concrete and price the extra labor honestly.
Most Boca Raton residential garages are a one-day install. We diamond-grind in the morning, lay the epoxy basecoat and broadcast flake, then apply the polyaspartic topcoat the same afternoon — sequenced while the slab still sits well above the dew point, not into a cooling evening. Larger commercial or industrial slabs may run two days; you get the schedule before we start.
Walk on it in about 4 hours, park on it in 24. That fast return-to-service is the polyaspartic topcoat doing its job — and quick cure also carries the film past its vulnerable stage before evening moisture settles on the slab. A straight epoxy floor would keep you out of the garage for days.
A full system: moisture-mitigating primer where the slab calls for it, a pigmented 100%-solids epoxy basecoat rolled edge to edge, vinyl flake broadcast to rejection, then a clear polyaspartic topcoat. That primer call is a genuine Palm Beach County coin-flip — coastal-ridge sand and shell drains deep, while the flatwoods soil west of the ridge holds water — so we test rather than assume. Flake is scraped flat and vacuumed before the topcoat.
Dust-mop or sweep it, then hose it down or damp-mop with a mild cleaner whenever it looks tired. Nothing to wax, nothing to reseal, no proprietary products to reorder. The epoxy surface is non-porous, so oil, brake fluid, and the fine grit that blows in off the driveway sit on top and wipe straight off.
Yes. Isolated damage — a dropped jack stand, a toolbox corner, a gouge from a folding ladder — gets spot-repaired and blended in place, with no reason to redo the whole floor. That’s the quiet advantage of flake epoxy over a solid color: the chip pattern breaks up the eye, so a blended patch disappears into it.
Any month works. Boca Raton has no dry season to wait out, so instead of picking a month we manage dew point — the slab has to stay above it through prep, application, and cure. Polyaspartic cures across a wide temperature range and the work happens inside your garage. Freeze-thaw never enters it here. We moisture-test year-round, because slab moisture outranks the calendar.
It shapes the install far more than the finished floor, and unlike most markets there is no dry season here to wait for — Boca Raton stays muggy roughly eight months a year, with August muggy nearly every single day. So the number we watch is dew point, not the thermometer: the slab has to hold about 5°F above it through grinding, coating and cure, or condensation and amine blush quietly ruin intercoat adhesion. We schedule around falling evening slab temperatures, dehumidify, moisture-test every slab, and prime with a vapor barrier when the readings ask for one.
Not the coating — the slab under it. Salt works into bare or thinly sealed concrete and pits it, while a seamless, fully bonded, non-porous system gives chlorides nothing to grab. What genuinely varies across town is drainage: garages on the coastal ridge sit over deep sand and shell that drains sharply, and the flatwoods soils west of the ridge hold water near the surface for months at a time. A Highland Beach garage and one out in Boca Del Mar get the same build; the moisture readings decide the primer.
Not under a properly installed system. Mold needs moisture and a food source; a fully bonded, non-porous coating over a moisture-tested slab leaves no gap for water to collect. Problems arise when a coating is applied over a damp slab with no barrier — the exact failure our moisture testing exists to prevent.
Yes — Boca Raton proper plus Delray Beach, Boynton Beach, Deerfield Beach, Highland Beach, Parkland, Coral Springs, Pompano Beach, Lighthouse Point, Coconut Creek, Wellington, Lake Worth Beach, Jupiter, Palm Beach Gardens, West Palm Beach, Margate, Hillsboro Beach, and Royal Palm Beach. If you’re nearby and not on the list, call us at (561) 556-7404 and ask.
Customer Reviews
Apex Reviews From South Florida
5Based on 13 Google reviews
CChloe Lewis2025-10-09 18:37:07 +00:00
Had a great experience with Apex Epoxy Flooring. They were professional, reliable, and clear about what to expect. Everything was done just like they said it would be.
AAndrew Corr2025-10-01 23:40:17 +00:00
Overall, the flooring service was quick, moderately priced and done well. No complaints here.
JJohn Edwards2025-09-08 15:56:46 +00:00
Everything was great from the initial consult through the install. They delivered what they promised when they promised it and were both respectful and clean. Thanks everyone!
JJackson Turner2025-04-03 19:26:53 +00:00
I hired this company to apply epoxy for my 2,500 sq ft office space, its came up even better then I taught. Thanks!
EElliot P2025-04-02 17:32:27 +00:00
Apex Epoxy Flooring did a fantastic job! Looks perfect, great quality epoxy. On time, good communication, affordable prices.
JJacob Carter2025-02-05 18:49:30 +00:00
I highly recommend Apex Flooring! They were honest, efficient, and the quality of work speaks for itself.
For just $2,700, give your 3-car garage a professional epoxy flooring finish backed by our lifetime warranty. Fill out this form below to take advantage of this limited time offer!
2 Car Garage floors for Just $2300
For just $2,300, give your 2-car garage a professional epoxy flooring finish backed by our lifetime warranty. Fill out this form below to take advantage of this limited time offer!
3 Car Garage Flooring for Just $2700
For just $2,700, give your 3-car garage a professional epoxy flooring finish backed by our lifetime warranty. Fill out this form below to take advantage of this limited time offer!
2 Car Garage floors for Just $2300
For just $2,300, give your 2-car garage a professional epoxy flooring finish backed by our lifetime warranty. Fill out this form below to take advantage of this limited time offer!
Get Started Now
Ready to upgrade your garage with Apex Epoxy Flooring? Fill out the form below, and let us handle the rest. Whether it’s a 2-car or 3-car garage, we’re here to deliver top-notch service.
Most popular
